please wait
- Forum
- General C++ Programming
- How to program atmega32u4?
How to program atmega32u4?
Jun 16, 2017 at 9:21am
How to program atmega32u4?
Here is the atmega32u4 datesheet:http://www.componentschip.com/details/Atmel/ATMEGA32U4.html
is it right?
Install the Bootloader interface on the PC as described in the section called “How to Install the "Bootloader PC tool"”.
Start the Bootloader PC GUI "FLIP".
Short strap J102.
Connect the board USB connector to the PC.
Select Device = ATmega32U4 (Device - Select).
Here is the atmega32u4 datesheet:http://www.componentschip.com/details/Atmel/ATMEGA32U4.html
is it right?
Install the Bootloader interface on the PC as described in the section called “How to Install the "Bootloader PC tool"”.
Start the Bootloader PC GUI "FLIP".
Short strap J102.
Connect the board USB connector to the PC.
Select Device = ATmega32U4 (Device - Select).
Jun 16, 2017 at 11:50amclosed account (48T7M4Gy)
https://learn.adafruit.com/atmega32u4-breakout/intro
Topic archived. No new replies allowed.